Vehicle sound effects and recordings – cars, helicopters, motorcycles, airplanes, ships, trains and sci-fi
Welcome to the first pack in the RSAudio European Car series: This pack focuses on the Renault Clio, one of Europe’s most popular cars.
This pack contains a wide selection of multi-channel synchronous files from up to 8 different perspectives.
We used a number of microphones in the engine bay and at the exhaust so you can balance the sounds to your own taste.
Also featuring over 50 foley files including doors, windows, seatbelts, pedals and much more.
Comes with comprehensive metadata suitable for use with a wide range of sound library software.
Buckle up for 20+ gigabytes of high quality car sound effects. 10 everyday cars. Drive-bys, handling sounds, ignitions, honks, engines, doors and trunks. Get this SFX library and you will no longer look for high quality sounds of everyday cars.
We completely wired 10 everyday cars, rented a super-quiet test track for our recordings and are now proud to deliver really great and pristine long takes of drive-bys, car engine sounds, exhaust sounds and stereo interior recordings. We also give you a great selection of close handling sounds like switches, indicators, ventilation, handbrakes, basically everything we could find.
• Mercedes Benz 300SE 3.0 (1991) – gasoline
• BMW 318i 1.8 (1991) – gasoline
• VW Polo 6N1 (1996) – gasoline
• Peugeot 307 SW (2004) – gasoline
• Subaru Forester 2.5 XS (2006) – gasoline
• Opel Corsa C 1.4 (2007) – gasoline
• Audi A3 (2007) – gasoline
• BMW 1 series (2009) – gasoline
• Fiat Panda 1.2 (2011) – gasoline
• Audi A5 3.0 TDI V6 (2011) – diesel
All files contain extensive metadata to provide you with the fastest and easiest workflow possible.
Get the sounds of a powerful excavator – the Excavator MF 860 – covering both interior and exterior recordings.
The Excavator library gets you the sound of the engine recorded on-board (under the hood + interior from the cabin) while driving on the different roads, exterior engine with passes in mono and stereo recorded on asphalt, hard ground and dry grass and foley. Engine sounds comes in two versions, designed and RAW, so you can design it on your own.
The ‘Excavator MF 860’ sound library is a result of two full day recording sessions. The first session covered the sound of the engine, recorded under the hood with two DPA 4061 microphones, and exterior digging sounds recorded in mono and stereo with Rode NTG3, 2 Sennheiser MKH 8040 and Sony PCM-M10 recorder. The second recording session covered the exterior passes, interior sounds, foley and digging, since we had to dig our machine from the mud.
The library gets you 83 files and has a total length of 145 minutes. Everything was recorded in 96 kHz, edited, cleaned and meta tagged.
Finally a SFX library that delivers authentic Formula 1 recordings! This F1 Williams FW29 was driven by Nico Rosberg in the 2007 Formula 1 World Championship. It has a Cosworth V8 engine with 650 hps. The recording consists of both onboard and exterior material, and covers acceleration through gears, driving at steady rpms, ramps, passbys, approaches and aways, startup, idle, blips and shutdown. The onboard channels are two exhaust, two cockpit, intake, rear wing and two in the engine.
This fan sound effects library delivers the sounds of a floor fan, a wall-mounted bathroom fan and a hairdryer. It includes sounds such as starts, stops, idle and fans at different speed levels. Need the sounds of actual fans, motors, whirling winds – or imagined flying vehicles – that's what you get 42 minutes of right here.
Get the roaring sounds of a 1974 Ferrari Dino. This Daytona 246 GT edition Italian made exotic car is a 5 speed manual mid-engine v6, and it's known to be The Ferrari without an exterior Ferrari badge.
53 wave files were captured in 24 Bit, 96 kHz – and the combined recorded driving time is more than 28 minutes.
Channel 1 = Exhaust 1, Channel 2 = Exhaust 2, Channel 3 = Engine 1,
Channel 4 = Engine 2
External Passby Settings:
Stereo in Left and Right Channels
This sound collection covers a wide range of sounds produced by this colorful characteristic car. Not only extensive driving sounds but also foley (doors, windows, body tapping, …), horn blasts and engine loops. All in high quality 96/24 BWAV-files, recorded with high end equipment.
The recordings are multitrack. For the onboard recordings you’ll find synchronized recordings of engine, exhaust, cabin. For the roadside recordings you’ll find an ortf stereo pair (on a stand) and a long shotgun mic (handheld, tracking movement)
Fiat Panda 169 sound library delivers vehicle sounds of a usual mass production car. The featured model was manufactured in late 2009 and has run about 40.000 miles at the time of recording. With the small 1.1 litre / 55 HP engine it is a lively compact size city car for daily use. The rear muffler already showed some rusty traces of age so that the entire car emits some very characteristic sounds, especially from the exhaust.
For the library the Panda was recorded to 18 takes with 6 onboard mics. These takes feature the car in various driving situations on asphalt, dirt road and gravel. Each take comes as Reaper set with time-aligned tracks from 2 mics in the engine bay, 2 interior mics, 1 wheelhouse and 1 exhaust microphone.
The exterior sounds – that encompass engine on, off, acceleration, approach, stop etc. – are recorded with Sennheiser MS Setup.
Additional foleys of doors, switches, wipers, windows, seat belts etc. are recorded separately with the car´s engine turned off.
Get the sounds of switches, buttons, knobs and handles – recorded inside an old, retired flight simulator donated to the Danish Technical Museum.
This machine used to make aspiring pilots sweat in their seats, putting them through all sorts of mechanical failures, emergency landings, and just plain flying.
There is basically a switch, button, knob or handle to start every single possible emergency situation a pilot and crew may encounter when flying.
When the sound recording started, some of them were partly broken, and others missing, some did not turn or switch, but most of them were still there and worked beautifully. The variety is surprisingly great, and very different from today's modern switch sounds.
91 tracks, recorded with a Sennheiser 416 onto a Sounddevices 702, all tracks Metadata tagged.
Foley Plus is a massive collection of Foley-related sounds including new and unusual footsteps, clothing movement, household/kitchen/bathroom/office sounds, wood and metal creaks, squeaks, scrapes, and so much more you’ll have to check out the track list! Add a big PLUS to your FOLEY library!
Get authentic vintage car sounds with these recordings from a nice, original Ford 1932. This is the first year with Ford's famous sideoiler V8. The car has three gears of which 2nd and 3rd are synchronized. The recording includes engine start, idle and driving at different speeds. At the end of the recording there is also some revving and different rpm's without any gear. The channels are left and right interior surround, engine and exhausts. The recording length is 10 min 20 s.
Get the sounds of a Ford F-150 2013 truck, captured by Watson Wu. Metadata is included with over 52 minutes of combined recording time split into 85 ready to use wave files. There are onboard, external, and foley sounds, all in high quality 24 bit resolution, 96khz sample rate. This is the right library when you need truck sounds for your film, TV, or game projects. Note that are no interior cab recordings in this package.
Onboard multi-track recordings are in 4 separate mono wave files. Drag & drop or import each of the files into your audio editing software, then align them for creative mixing. There are also stereo mix versions of the OnBoard recordings. The External recordings are in stereo wave files. The download is a 1.5gb compressed .rar file (3.45gb Uncompressed).
Channel 1 = Engine, Channel 2 = Near Air Intake, Channel 3 = Exhaust 1, Channel 4 = Exhaust 2
Stereo in Left and Right Channels
This library has an extensive collection of sounds from a well-used 1990 Ford Ltd Crown Victoria with a 4-speed AOC automatic transmission. With its 302 cubic inch, 5 liter, V8 engine, rated 152 horsepower, you'll get thick beefy growls from this Ford. The library includes all kinds of driving at various speeds, cruising, startups, shutdowns, reversing, driving at constant RPMs, gearing, various accelerations and decelerations, and long and short ramps.
Some foley is also included: doors, hood functions, parking brake and gear shifter, and IR sweeps. With 12 onboard channels covering several interior, engine and exhaust perspectives, and 13 exterior channels with microphones positioned at different spots around the recording location, you'll get up-close approaches, aways, passbys and more at different speeds.
A selection of recordings of a 1960 Ford Prefect, including starts, stops, passes and ride.
The first mini-library from Immersive FX – all you need for a nice old UK car scenario:
Old and new types of freight trains recorded with a high quality binaural dummy head. All tracks are recorded up close to capture all the characteristics of each freight train.
This sound library gathers the heavy, powerful sounds of freight trains, and the scream and chatter of transport rail cars.
Takes include idling, approaching, departing, and passing by. There are rail squeaks, screeches, and clatters. Each engine is carefully documented with its locomotive type and version, and is listed in full Soundminer metadata.
With A Sound Effect, Asbjoern has created a web site where our international community can browse, learn, and share the vast fruits of our labors. Together we are accelerating the very real potential power of sound design as a recognized art form.
A Sound Effect is an excellent resource for us to keep our animated films sounding unique and exciting.
A Sound Effect is a great asset to have discovered.
We found the site very easy to navigate, purchasing and downloads were effortless and the effects themselves are awesome! Asbjoern has done us all a great service.
We’ll definitely be back!
There are many great independent sound effect libraries available these days. The main problem with having so many, is keeping track of them!
A Sound Effect is a great hub, and is one of the first places I visit to look for sounds by category or genre. I started coming here to see if I could find libraries that I knew I had heard, but forgot WHERE I had heard them.
And in the process discovered libraries I never would have found otherwise. Great work! Keep it up!
A Sound Effect is a great resource for keeping up on what's out there in the SFX library world. The site is well organized and it's easy to find stuff.
I love the behind the scenes articles - and the ability to purchase directly through the site is super convenient. The process is very straight forward and painless. I recommend it all the time.
We're always looking for new sounds to mangle, so when A Sound Effect had a holiday sale, I tried them out.
The purchase experience is really smooth and quick, and delivery is almost instant.
I'll definitely come back to them again in the future!
A Sound Effect is a wonderful resource for indie sound effects libraries. On top of that, it has some of the finest sound design, film and game audio interviews!
I often need very specific types of sounds so I've become a big supporter of independent recorders.
Until now I've always had to go to their individual websites. Now I can find them all in one place.
And, Asbjoern is great to work with!
A Sound Effect is a well curated boutique sound effects shop and a great place to find industry interviews and learning resources.