The Audi A4 B8 Allroad 2.0 TFSI is a 211 HP 4×4 car with turbo, and this library gets you almost 9GB of recordings, featuring 155 96kHz and 24bit files (including RAW files, 111 without RAW), with a total length of 213 minutes (without RAW files).
The library covers different sound effects like engine during regular driving, reverse or accelerations. It was recorded with 3 microphones mounted under the hood and one inside the drivers' cabin to capture the interior in sync with the engine.
It was recorded with two Sound Devices 702, two DPA 4061 microphones, two Sennheiser MKH 8040, Sony PCM-M10 and Rode NTG3.
In addition to the onboard sound you’ll find exterior driving, turning, stopping, turning engine on and off or reverse sounds recorded from 2 perspectives.
Also driving on the snow and asphalt effects recorded with DPA 4061 mounted near the tyres, and finally, passes recorded from 3 perspectives. Slow driving (20 to 40 km/h), medium speeds (40 to 80) and fast (from 80 to 140 km/h), stopping and accelerations.
Those sounds were recorded in mono with Rode NTG3 following a car, stereo ORTF recorded with MKH 8040s capturing passes from left to right, and stereo AB with Sony PCM-M10 capturing sound from right to left.
This library also contains some basic foley, like closing and opening doors, servo sounds, windows, buttons or seatbelts.