Product Description
Get your gears grinding with 281 sounds by a metal sheet bending machine from the 1950s.
Made out of cast iron by Thyssen Krupp, this machine was used to bend i.a copper sheets to create rain gutters or other parts of drainage or heating systems.
The library is composed of two main elements, the outer cogwheel held by a hammer clutch to calibrate the rollers, and the inner cogwheel used to lower or raise a massive clamp to bend the metal sheet at a right angle.
The outer cogwheel creates snappy impacts, as the hummer clutch snaps into place, providing you with the base for your next lever or mechanism design.
The inner gear on the other side provides both calm and screeching grinding gears, as the heavy clamp is raised or lowered. Setting you up, for the next intricate mechanism design.
The cogwheels were recorded from two angles and the library contains both single files, as well as a joined file, per sound and stereo files for the outer cogwheel.
Resulting in a total of 984 wave files in 96kHz and 24 Bit.