Follow on: Twitter | Facebook | LinkedIn

Home Mechanical Page 2

Mechanical

  • Industrial Big Machines Play Track 43+ sounds included $79 $52.93

    The collection consists of 43 stereo recordings of 12 rare, industrial machines used many decades ago in German power plants and industrial sites. It includes the sounds of massive 10KV power switches, a Siemens exciter machine (power generator) built in 1945 and many other vintage machines.

    All machines were recorded in isolation without background noise and at high sample rates (192 kHz / 24 bit) with a Sound Devices 633 recorder and the Sennheiser MKH 8040 Microphones in close ORTF, taking full advantage of the extended frequency range (30 – 50000 Hz) of the microphones. Some machines were additionally recorded with a stereo setup of Barcus Berry 4000 series contact mics.

    The following 12 machines were recorded
    – some in multiple takes:

    • Ash breaker
    • Ash blower
    • Coal dispatcher
    • Siemens exciter machine
    • Gas turbine model
    • Motorized throttle-Flap
    • Oil atomizer
    • Pneumatic power switch
    • 10KV power switch
    • Rotation motor
    • Manual steam machine

     

    33 %
    OFF
    Add to cart
  • Mechanical BigBlock Play Track 369+ sounds included, 82 mins total $38

    This library is an intimate profile of a completely original 1967 Chevrolet Corvette Coupe. It boasts a 427 ‘Big Block’ 400 HP engine, a 4-speed Muncie transmission, 3×2 tri-power carburetor, and plenty of mechanical accessories.

    We recorded anything on the vehicle that made a definable noise: the handbrake, clutch, shifter, turn signal, horn, headlights, hood latch, gas cap, doors, and more. Though the primary focus, of course, was on the beasty combustion and exhaust systems. We collected multi- and single-point, interior and exterior, front to back recordings of the engine cranking, idling, and being cut. We also experimented with a wide spectrum setup for passbys and various driving maneuvers. Files pertaining to the same event are marked accordingly for easy grouping and layering. This collection was designed so that in using multiple grouped files, you can effectively dial in/out the exhaust pipes independently (driver side, passenger side), interior ambience, and direct engine sources as desired. Together with a number of alternative variations, you can use this library to bring any car in your project to life, quickly.

    Don't be afraid to give it a little gas. Enjoy!

    Add to cart
  • Bicycles BMX Trick 192 kHz Play Track 71+ sounds included, 24 mins total $58

    Welcome to the first comprehensive collection of BMX extreme sport riding sound effects. Diverse environments, surfaces, obstacles and bikes are at your fingertips now.

    Captured at 192 kHz 24 bit high resolution with a gear such as ultra-bandwidth Sanken CO100K microphone, the files are ideal source for awesome slow motions, as well as for realistic and creative sound design in general.

    Library highlights:
    • rides, pass bys, jumps, bumps, lands, crashes, tricks, grinds, squeaks, skids and other effects
    • divided into Big Ramps and Street Freestyle folders
    • both indoor hall and outdoor street locations
    • gravel to smooth surfaces
    • usually several variations in each file
    • natural dynamic range
    • professional gear used – Sanken CO100K, Sennheiser MKH 416, MKH 30, Sound Devices 788T, Zoom F8

    Add to cart
  • Animals & Creatures Broken Robot Play Track 87 sounds included $12.99

    This library is a small “utility” collection of sounds great for use as Robot/Machines but also great for UI and Weapon design elements.  Servos, various metal objects and analog synths were recorded as source material to create this library.  The library includes raw servo recordings and meticulously performed or designed robotic/machine-like sounds.

    Bonus – Forge Sound Design Tool Sample Map

    If you own the Forge Sound Design Toolkit this library also comes with a specially curated sample map.  The sample map can be loaded into the sampler for randomization and the creation of more complex sounds.

    Add to cart
  • Mechanical Brushcutter Play Track 41 sounds included, 87 mins total $20

    Need some motor / engine sounds from an unusual source? The Brushcutter library features everything from cutting sounds, engine starts, stops, idles and revving sounds, metallic squeaks and impacts. You’ll find files of different brushcutters working alone and at the same time recorded from different perspectives and distances.

    The whole recording session took place during a special event, as five 5 volunteers were clearing some harsh terrain for mud turtles. And to make the area habitable for the turtles, all the small branches and trees had to be removed. So not only did the turtles win, so do you as you now have a unique collection of sounds at your fingertips.

    Brushcutter gets you 41 high quality .wav files, with a total of 87 minutes of recording time.

    Add to cart
  • The Burroughs Protectograph that we acquired was manufactured around the turn of the 20th century and had a single unique function – to stamp and emboss checks for banks. The Burroughs corporation has been around since 1886, and was an early force in the adding machine, check stamper and typewriter industries. This Protectograph version had an electric mechanism that would move large printheads down through a ribbon and would stamp a check hard and repeatedly for as long as the print key was held down. Our machine was acquired in perfect working condition.

    Its keys have a short through but a satisfying clack, and the punch mechanism is a huge whir stamp sound than can cycle if the punch button is held down. We rolled with the case both on and off, which revealed very different sounds from the main electric mechanisms.

    We ran the whole session with three perspectives miked up – front by the keys, in the back by the punch and a wide perspective perfect for bgfx placement. The front and back mics were Schoeps CMC6.MK4 and the wide mic was an AT 4050 in omni about 5 feet away. Listen to the straight examples give a clear accounting of the type of sounds we got from this machine, and the bent examples show what can really be done with those sounds and the Kontakt instrument.

     

    Key features for Burroughs Protectograph

    • 3 mic perspectives of each performance
    • 10 unique articulation groups
    • 10 + performances per articulation
    • 13 Kontakt .nki files (unlocked)
    • .nki files require full version of NI Kontakt 4 or higher
    • photographs and video stills

    Note: Can be used without Kontakt too!
    All Kontakt instrument libraries include fully unlocked and accessible metadata tagged .wav files. You don't need any version of Kontakt to use these files as a standalone sample library.

    Add to cart
  • Mechanical Buttons + Mono Machines Play Track 900+ sounds included $35 $25

    This sound effect library from JordanFehrFX gets you more than 900 button and equipment sounds, captured by Jordan Fehr. Sound effects include buttons, switches, clicks, latches, clasps, bags, zippers, wild foley, machines, ambiences, cases, and more!

    It also comes with a special bonus library by game audio guru Damian Kastbauer, featuring more than 70 minutes of mono machine recordings and ambiences.

    Buttons Library Key Features:

    • 16 minutes of audio @ 48khz/24bit Mono
    • 46 Files
    • 144 MB
    • 900+ performances

    29 %
    OFF
    Add to cart
  • Foley Buttons and Switches Play Track 550 sounds included $15

    We here at Sonner Sound have collected a wide range of buttons, switches handling noises, cranks and dials, both old and new. There’s over 500 sounds collected in 68 files, so something here for everyone! Regular household buttons such as light switches and computer mice and some more experimental in steampunk style. They’re recorded at 96 kHz and 48 kHz at 24 Bit (both Stereo and Mono) with rich meta data. Recorded with Sennheiser MKH50 and DPA 4017.

    Video Thumbnail

    Add to cart
  • Foley Buttons, Switches & Levers Play Track 2000+ sounds included $35

    This new library gets you a huge collection of all kinds of Buttons, Switches, Knobs, Levers, Sliders – that were pushed hard (and soft).

    From small buttons, small mechanics to big levers of different materials.
    Perfectly cleaned and edited for direct use.

    Whenever there is something to be pushed, pressed, released, hit, clicked, pulled – you’ll find the sounds to go with it here.

    All sounds are delivered as BWF tagged, 24Bit / 96kHz wav-files

    Add to cart
  • Materials & Texture Cabinet Shop Play Track 115+ sounds included, 120 mins total $69

    The ‘Cabinet Shop’ library includes a large variation of different wood cutting, shaping, and morphing machinery. Some of these elements are table saws, drill presses, giant band saws, radial arm saws, air compression valves, horizontal drill presses, jointers, stroke sanders, drum sanders, hammers, hand saws, lathes, pressure releases, and much more!

    The library was recorded in Diebold’s Cabinet Shop, founded in 1936. It is a well-recognized local custom cabinet shop located in Logan Square, just North West of downtown Chicago.

    General atmospheric sounds of the cabinet shop, such as air conditioners / heaters, fans, clocks and room tones, are also included.

    Add to cart
  • Mechanical Camera. Play Track 300+ sounds included $32

    Camera is a sound effects collection of over 300 high definition camera sounds.

    It contains camera clicks, zooms, timers, flashes, opening and closing film lids, flashes charging and more. Where relevant, there are different performances of the same sound. All files are metatagged with Soundminer data.

    Cameras included:

    Pocket camera, digital, Samsung D830 • Pocket camera, digital, Kodak CX7430 • Pocket camera, digital, Canon Powershot S400 • Pocket camera, analogue, Kodak Instamatic, 60’s model • Flash, Canon Speedlite 430EX • Mirror reflex, analogue, auto transport, Minolta 7000 • Mirror reflex, analogue, manual transport, Canon FTB • Mirror reflex, digital, Nikon D90

    Add to cart
  • Mechanical Cameras Play Track 100+ sounds included $20

    The Cameras sound library features sounds of no less than 20 different cameras. Everything was recorded with Sound Devices 702, Rode NTG3 and Oktava MK012. The Camera library delivers sounds of different camera shutters, pulling film advance levers, handling noises, self timers, AF mechanisms, pushing buttons and rotating dials. This sound library features camera models from companies like Kodak, Polaroid, Nikon, Olympus, Yashica, Minolta, Fujica, Halina or Pentax.

    Includes recordings from the following cameras:
    Canon 5d Mark II • Canon Eos 3000n • Fujica AZ1 • Halina H160 • Kodak Brownie 127 • Kodak • Coloursnap 35 • Kodak Eastman Pocket camera • Kodak Instamatic 55x • Kodak Instamatic 200 • Kodak Six 20 Brownie D • Minolta Dynax 303 • Nikon D5000 • Nikon D5500 • Nikon FM2n • Olympus Newpic XB AF • Olympus SP510UZ • Pentax SP1000 • Polaroid Spectra • Yashica Minitec Super

    This library will be updated in the future, so you will receive free update link every time I’ll record new cameras.

    Add to cart
  • Cars Car Interiors Play Track 430 sounds included, 14 mins total $69

    car interiors library is a great supplement for all the car engine sounds that you already own. That way the action on the inside of the car is not stale at all. Dashboard buttons, seatbelts, automatic windows, switches, switching gears, brake, clutch and gas pedals, vents, turning signals. They’re all here!

    Got a whole bunch of roaring car engine sounds but then realised that you’re not equipped with all of the boring stuff like:

    car door handles, seatbelts, turn signal, air vents, buttons and switches, seats, storage compartments, horns, windows, pedals (gas, brake, clutch), handbrakes wend

    and all other Car Interior sound effects? Well then.. look no further! This is just the pack for you.
    160 wav files with over 400 single sounds in total. Car Interiors will spice up that car interior scene with real, crisp sounds, recorded from over 6 cars in total!

    Add to cart
  • Materials & Texture Carpenter’s Tools Play Track 100+ sounds included, 43 mins total $30 $7

    “Carpenters Tools” is a collection of sounds that come directly from the carpenter’s workplace. You will find sounds from a variety of machines and hand tools that help the carpenter form his creations. All machines are recorded in their full cycle: start, movement, part machining and stopping. This collection will fill your missing sounds from the carpenter’s workshop.

    Tool recordings included:
    Circular saw, small circular saw, small planer machine, table planer machine, old belt grinder, disc grinder, grinder, band saw, jigsaw, milling machine, hand drill, cordless drill, smirgell, vacuum cleaner, internal aspiration, external aspiration, saw, big size flat file, fine flat file, sandpaper

    77 %
    OFF
    Add to cart
  • Mechanical Cassette Play Track 99+ sounds included $9

    We are bringing back old-school cool with Cassette! This 99+ sound effect package features all the trademark sounds of the cassette player along side more interesting sonic flavors.

    Running at 24bit/96khz this collection shines best when used creatively to develop your own textures in post-sound, apps, games and more. Well grounded metadata is included to help easily navigate through this collection of retro sounds.

    Add to cart
  • Mechanical Cassette Deck Play Track 324 sounds included $45

    Cassette Deck is a set of sounds collected from a small group of analog cassette players. It’s filled with great mechanical buttons and switches, latches, a few motors at different speeds, and multiple microphones/perspectives per take. Great if you’re building some mechanical interfaces!

    Add to cart
  • Mechanical Cassette Tone Play Track 89+ sounds included $19

    A collection of buttons and motor sounds recorded from a Sony TCM-939 cassette tape deck.

    Useful for UI design, mechanical sound design and all manner of everyday switches. Recorded at 96 kHz these recordings sound amazing pitched down to become big mechanical noises.

    Includes transport buttons, motor sounds, tray opens and closes, tapes in and out and the deck in operation from exterior and interior perspectives. Also present are cassette and tape case handling sounds.

    Almost all the sounds were recorded using a mono DPA 4060 omni mic at very close range for details and a Sennheiser MKH 40 for a more overall sound.

    The miniature size of the DPA 4060s means that there are numerous takes of the machine running recorded from inside the tape tray, which results in amazing close details of the motor and buttons.

    Add to cart
  • Industrial Chain Ferry Play Track 17+ sounds included, 56 mins total $29

    Chain Ferry features the remarkable sounds of a 100 year old ferry with a specific drive system. The ferry pulls along a strong chain lying at the ground of the river to cross. This is achieved by a clever combination of 3 drive wheels that guide the chain and prevent it from dropping to the ground.

    The Library contains several complete audio takes of the ferry in action – from departure to arrival. This encompasses engine start, engine idle, loading ramp noises and bangs plus a lot of chain rattling from various perspectives. The sounds are recorded aboard and from both sides of the river so that the entire scenery can be covered acoustically.

    Add to cart
  • Mechanical Chainsaw Play Track 102+ sounds included $40

    Need chainsaw sound effects? This library gets you a lot! From chainsaw motor / engine starts and stops, sawing at different RPMs and durations, idles, different perspectives and distances – and even different engine types. This library includes recordings made with both small and big Stihl chainsaws. A total of 66 .wav files are included for more than an hour and a half of chainsaw action.

    Updated version:
    This sound library was updated with 12 designed and 24 raw files of using a Stihl chainsaw, recorded with DPA 4061 mounted on the chainsaw.
    Add to cart
  • Mechanical Chainsaws, Mistblowers & Pole Pruner Play Track 11+ sounds included, 56+ mins total $49

    This library is a collection of hand tools with gasoline engines. Includes:

    7 Chansaws: Husqvarna 3120 XP (King of Chainsaws), Stihl MS 880 (The most powerful series-produced chainsaw in the world),
    Stihl MS 440, Stihl MS 361, Stihl MS 201, Stihl MS 192 and Stihl MS 180 (Worldwide Bestseller).

    3 Mistblowers: Stihl SR 450, Kawashima ST520, Kaxifa 3WF-3.

    1 Pole Pruner: Stihl HT 75 Professional Pole Pruner.

    Within this library you will find long idle and work loops, a series of perfect and clean ignitions, engines “on and off”, and engine bursts.

    Add to cart
  • Bicycles City Bicycles – BadBike Play Track 72 sounds included $25

    This is a unique bicycle library that captures this characteristic bike in clean, quiet, nicely performed true exterior rides. Including multiple perspectives, speeds and actions. From fast passbys on asphalt to slow onboard recordings and smooth stops.

    The BadBike is a rattling and broken bicycle that perfectly nails the sound of a worn out bike, it’s passbys and hardstops are hard too miss.

    Speeds and actions:
    Three speeds. Departures from slow, medium to fast getaways. Arrivals from slow stops with gently squeaking handbrakes to heavy stuttering skids.

    Five perspectives:
    1. Onboard Front: captures the whirring tire and surface sound.
    2. Onboard Pedal: nice overall combination of pedaling, crank creaks, chain rattle, tire and surface sounds.
    3. Onboard Rear: close up sound of the rear axle, with chain, sprocket and switching of gear.
    4. Tracking shot: mono recording of the passby, keeping the bike in focus while passing by.
    5. Static XY shot: stereo recording of the passby that emphasizes speed.

    Overview of perspectives and mic placement:

    Onboard recordings are 2-3 minutes long depending on speed. Higher speeds > shorter duration.
    All 3 onboard mics are edited in sync with one another to make layering easy.
    All Passbys, Arrivals and Departures move from Left to Right.

    Metadata & Markers:
    Because we know how important metadata is for your sound libraries we have created a consistent and intuitive description method. This allows you to find the sound you need easily, whether you work in a database like Soundminer/Basehead/PT Workspace work, or a Exporer/Finder window.

    However, we are aware that some people have different needs for different purposes, so we’ve created a Metadata Reference Guide that explains the structure. And because we’ve automated the metadata proces, you can be confident that a ‘find & replace’ command will always replace all instances.

    Download our Metadata Reference Guide

    Download complete metadata PDF

    If you have any questions about this, contact us!

    Additionally, we added Markers to some wave files, so specific sound events are easy to spot in Soundminer or other database apps.

    Need more?
    The BadBike library is part of the complete ‘City Bicycles’ library package available at www.frickandtraa.com. It consists of all 4 bicycles and includes additional surfaces and extras ranging from one-off  bicycle passes captured in the city and bounces and rattles. The extra bicycles surfaces and additional effects are also available seperately here on ‘a Sound Effect’. If you’ve bought a single library and want to upgrade to the full package, contact us for a reduced price on the complete City Bicycles library. Every part of City Bicycles that you paid for will get you an extra reduction on the full package.

    Video Thumbnail

    Responses:

    344 AUDIO:City Bicycles has a plethora of content, for a great price. The perfect balance between a great concept, great presentation and outstanding execution, lands them an almost perfect score of 4.9..

    The Audio Spotlight: City Bicycles is worth getting if you are in need of great sounding and well edited bicycle sounds.

    Watch a video created by Zdravko Djordjevic.

    Video Thumbnail

     

    Add to cart
  • Mechanical City Bicycles – Extra surfaces Play Track 162 sounds included $25

    This is a unique bicycle library that captures road surfaces from the perspective of super quiet bicycle. These are clean, quiet, nicely performed true exterior rides. Including multiple perspectives, speeds and actions. From fast passbys on asphalt to slow onboard recordings and smooth stops.

    The Extra Surfaces library provides 162 sounds captured on the following road types Large Bricks, Gravel, Grit, Icy Asphalt.

    The four additional ‘onboard road’ surfaces are the perfect extension for your other ‘City Bicycle’ library of taste. Just add it as a layer, mix it and voila your bicycle can move from gravel to bricks to grit or from large bricks to slippery icy asphalt roads.

    Speeds and actions:

    Three speeds. Departures from slow, medium to fast getaways. Arrivals from slow stops with gently brakes to smooth departures.

    Five perspectives:
    1. Onboard Front: captures the whirring tire and surface sound.
    2. Onboard Pedal: nice overall combination of pedaling, crank creaks, chain rattle, tire and surface sounds.
    3. Onboard Rear: close up sound of the rear axle, with chain, sprocket and switching of gear.
    4. Tracking shot: mono recording of the passby, keeping the bike in focus while passing by.
    5. Static XY shot: stereo recording of the passby that emphasizes speed.

    Overview of perspectives and mic placement:

    Onboard recordings are 2-3 minutes long depending on speed. Higher speeds > shorter duration.
    All 3 onboard mics are edited in sync with one another to make layering easy.
    All Passbys, Arrivals and Departures move from Left to Right.

    Metadata & Markers:
    Because we know how important metadata is for your sound libraries we have created a consistent and intuitive description method. This allows you to find the sound you need easily, whether you work in a database like Soundminer/Basehead/PT Workspace work, or a Exporer/Finder window.

    However, we are aware that some people have different needs for different purposes, so we’ve created a Metadata Reference Guide that explains the structure. And because we’ve automated the metadata proces, you can be confident that a ‘find & replace’ command will always replace all instances.

    Download our Metadata Reference Guide

    Download complete metadata PDF

    If you have any questions about this, contact us!

     

    Additionally, we added Markers to some wave files, so specific sound events are easy to spot in Soundminer or other database apps.

    Need more?
    The Extra Surfaces library is part of the complete ‘City Bicycles’ library package available at www.frickandtraa.com. It consists of all 4 bicycles and includes additional surfaces and extras ranging from one-off  bicycle passes captured in the city and bounces and rattles. The extra bicycles surfaces and additional effects are also available seperately here on ‘a Sound Effect’. If you’ve bought a single library and want to upgrade to the full package, contact us for a reduced price on the complete City Bicycles library. Every part of City Bicycles that you paid for will get you an extra reduction on the full package.

    Video Thumbnail

    Responses:

    344 AUDIO:City Bicycles has a plethora of content, for a great price. The perfect balance between a great concept, great presentation and outstanding execution, lands them an almost perfect score of 4.9..

    The Audio Spotlight: City Bicycles is worth getting if you are in need of great sounding and well edited bicycle sounds.

    Watch a video created by Zdravko Djordjevic.

    Video Thumbnail

     

    Add to cart
  • Bicycles City Bicycles – GoodBike Play Track 63 sounds included $25

    This is a unique bicycle library that captures this characteristic bike in clean, quiet, nicely performed true exterior rides. Including multiple perspectives, speeds and actions. From fast passbys on asphalt to slow onboard recordings and smooth stops.

    The GoodBike is a smooth sounding retro bike that doesn’t rattle or squeak, it has a really nice tire sound for a subtle presence in the mix.

    Speeds and actions:
    Three speeds. Departures from slow, medium to fast getaways. Arrivals from slow stops with gently squeaking handbrakes to heavy stuttering skids.

    Five perspectives:
    1. Onboard Front: captures the whirring tire and surface sound.
    2. Onboard Pedal: nice overall combination of pedaling, crank creaks, chain rattle, tire and surface sounds.
    3. Onboard Rear: close up sound of the rear axle, with chain, sprocket and switching of gear.
    4. Tracking shot: mono recording of the passby, keeping the bike in focus while passing by.
    5. Static XY shot: stereo recording of the passby that emphasizes speed.

    Overview of perspectives and mic placement:

    Onboard recordings are 2-3 minutes long depending on speed. Higher speeds > shorter duration.
    All 3 onboard mics are edited in sync with one another to make layering easy.
    All Passbys, Arrivals and Departures move from Left to Right.

    Metadata & Markers:
    Because we know how important metadata is for your sound libraries we have created a consistent and intuitive description method. This allows you to find the sound you need easily, whether you work in a database like Soundminer/Basehead/PT Workspace work, or a Exporer/Finder window.

    However, we are aware that some people have different needs for different purposes, so we've created a Metadata Reference Guide that explains the structure. And because we've automated the metadata proces, you can be confident that a 'find & replace' command will always replace all instances.

    Download our Metadata Reference Guide

    Download complete metadata PDF

    If you have any questions about this, contact us!

    Additionally, we added Markers to some wave files, so specific sound events are easy to spot in Soundminer or other database apps.

    Need more?
    The GoodBike library is part of the complete 'City Bicycles' library package available at www.frickandtraa.com. It consists of all 4 bicycles and includes additional surfaces and extras ranging from one-off  bicycle passes captured in the city and bounces and rattles. The extra bicycles surfaces and additional effects are also available seperately here on 'a Sound Effect'. If you've bought a single library and want to upgrade to the full package, contact us for a reduced price on the complete City Bicycles library. Every part of City Bicycles that you paid for will get you an extra reduction on the full package.

    Video Thumbnail

    Responses:

    344 AUDIO: 'City Bicycles has a plethora of content, for a great price. The perfect balance between a great concept, great presentation and outstanding execution, lands them an almost perfect score of 4.9..'

    The Audio Spotlight: City Bicycles is worth getting if you are in need of great sounding and well edited bicycle sounds.

    Watch a video created by Zdravko Djordjevic.

    Video Thumbnail

     

    Add to cart
  • Bicycles City Bicycles – RacerBike Play Track 82 sounds included $25

    This is a unique bicycle library that captures this characteristic bike in clean, quiet, nicely performed true exterior rides. Including multiple perspectives, speeds and actions. From fast passbys on asphalt to slow onboard recordings and smooth stops.

    The RacerBike is that kind of bicyle the snobby double shot cortado drinker nochalantly parks in the window at his favorite barista. This vintage Koga Miyata is  maintained very well, with fresh lubricants and perfectly lined up gears it’s a smooth racing devil that you pay nicely for second hand (we can tell, we are the coffee snobs).

    Speeds and actions:
    Three speeds. Departures from slow, medium to fast getaways. Arrivals from slow stops with gently squeaking handbrakes to heavy stuttering skids.

    Five perspectives:
    1. Onboard Front: captures the whirring tire and surface sound.
    2. Onboard Pedal: nice overall combination of pedaling, crank creaks, chain rattle, tire and surface sounds.
    3. Onboard Rear: close up sound of the rear axle, with chain, sprocket and switching of gear.
    4. Tracking shot: mono recording of the passby, keeping the bike in focus while passing by.
    5. Static XY shot: stereo recording of the passby that emphasizes speed.

    Overview of perspectives and mic placement:

    Onboard recordings are 2-3 minutes long depending on speed. Higher speeds > shorter duration.
    All 3 onboard mics are edited in sync with one another to make layering easy.
    All Passbys, Arrivals and Departures move from Left to Right.

    Metadata & Markers:
    Because we know how important metadata is for your sound libraries we have created a consistent and intuitive description method. This allows you to find the sound you need easily, whether you work in a database like Soundminer/Basehead/PT Workspace work, or a Exporer/Finder window.

    However, we are aware that some people have different needs for different purposes, so we’ve created a Metadata Reference Guide that explains the structure. And because we’ve automated the metadata proces, you can be confident that a ‘find & replace’ command will always replace all instances.

    Download our Metadata Reference Guide

    Download complete metadata PDF

    If you have any questions about this, contact us!

    Additionally, we added Markers to some wave files, so specific sound events are easy to spot in Soundminer or other database apps.

    Need more?
    The RacerBike library is part of the complete ‘City Bicycles’ library package available at www.frickandtraa.com. It consists of all 4 bicycles and includes additional surfaces and extras ranging from one-off  bicycle passes captured in the city and bounces and rattles. The extra bicycles surfaces and additional effects are also available seperately here on ‘a Sound Effect’. If you’ve bought a single library and want to upgrade to the full package, contact us for a reduced price on the complete City Bicycles library. Every part of City Bicycles that you paid for will get you an extra reduction on the full package.

    Video Thumbnail

    Responses:

    344 AUDIO:City Bicycles has a plethora of content, for a great price. The perfect balance between a great concept, great presentation and outstanding execution, lands them an almost perfect score of 4.9..

    The Audio Spotlight: City Bicycles is worth getting if you are in need of great sounding and well edited bicycle sounds.

    Watch a video created by Zdravko Djordjevic.

    Video Thumbnail

     

    Add to cart
  • Bicycles City Bicycles – UglyBike Play Track 54 sounds included $25

    This is a unique bicycle library that captures this characteristic bike in clean, quiet, nicely performed true exterior rides. Including multiple perspectives, speeds and actions. From fast passbys on asphalt to slow onboard recordings and smooth stops.

    The UglyBike is a typical old bicycle that’s working fine, but needs some TLC. It is a bicycle that’s just average, a little rattle a gentle scrape, a bike that everyone has had but got traded in for a newer one. A story of unrequited love.. :)

    Speeds and actions:
    Three speeds. Departures from slow, medium to fast getaways. Arrivals from slow stops with gently squeaking handbrakes to heavy stuttering skids.

    Five perspectives:
    1. Onboard Front: captures the whirring tire and surface sound.
    2. Onboard Pedal: nice overall combination of pedaling, crank creaks, chain rattle, tire and surface sounds.
    3. Onboard Rear: close up sound of the rear axle, with chain, sprocket and switching of gear.
    4. Tracking shot: mono recording of the passby, keeping the bike in focus while passing by.
    5. Static XY shot: stereo recording of the passby that emphasizes speed.

    Overview of perspectives and mic placement:

    Onboard recordings are 2-3 minutes long depending on speed. Higher speeds > shorter duration.
    All 3 onboard mics are edited in sync with one another to make layering easy.
    All Passbys, Arrivals and Departures move from Left to Right.

    Metadata & Markers:
    Because we know how important metadata is for your sound libraries we have created a consistent and intuitive description method. This allows you to find the sound you need easily, whether you work in a database like Soundminer/Basehead/PT Workspace work, or a Exporer/Finder window.

    However, we are aware that some people have different needs for different purposes, so we’ve created a Metadata Reference Guide that explains the structure. And because we’ve automated the metadata proces, you can be confident that a ‘find & replace’ command will always replace all instances.

    Download our Metadata Reference Guide

    Download complete metadata PDF

    If you have any questions about this, contact us!

    Additionally, we added Markers to some wave files, so specific sound events are easy to spot in Soundminer or other database apps.

    Need more?
    The UglyBike library is part of the complete ‘City Bicycles’ library package available at www.frickandtraa.com. It consists of all 4 bicycles and includes additional surfaces and extras ranging from one-off  bicycle passes captured in the city and bounces and rattles. The extra bicycles surfaces and additional effects are also available seperately here on ‘a Sound Effect’. If you’ve bought a single library and want to upgrade to the full package, contact us for a reduced price on the complete City Bicycles library. Every part of City Bicycles that you paid for will get you an extra reduction on the full package.

    Video Thumbnail

    Responses:

    344 AUDIO:City Bicycles has a plethora of content, for a great price. The perfect balance between a great concept, great presentation and outstanding execution, lands them an almost perfect score of 4.9..

    The Audio Spotlight: City Bicycles is worth getting if you are in need of great sounding and well edited bicycle sounds.

    Watch a video created by Zdravko Djordjevic.

    Video Thumbnail

     

    Add to cart
  • In need of some distinct bicycle passbys for a street scene? Missing some handling sounds of a bicycle? This library has the answer with superbly captured exterior recordings in the inner city without traffic.
    It includes various types of bicycles from the rattling sounds of a drunken cyclist or the smooth whirring of a nicely maintained bicycle with it’s headlight dynamo or the violent shrieking of a bicycle about to fall apart.
    And if that’s not enough you can always add more drama with the various handling effects we recorded, bounces / scrapes / skids / rattles it’s all here.

    Everything recorded in XY stereo and well described to make finding that one distinct bike easier.

    Metadata & Markers:
    Because we know how important metadata is for your sound libraries we have created a consistent and intuitive description method. This allows you to find the sound you need easily, whether you work in a database like Soundminer/Basehead/PT Workspace work, or a Exporer/Finder window.

    However, we are aware that some people have different needs for different purposes, so we’ve created a Metadata Reference Guide that explains the structure. And because we’ve automated the metadata proces, you can be confident that a ‘find & replace’ command will always replace all instances.

    Download our Metadata Reference Guide

    Download complete metadata PDF

    If you have any questions about this, contact us!

    Additionally, we added Markers to some wave files, so specific sound events are easy to spot in Soundminer or other database apps.

    Need more?
    This library is part of the complete ‘City Bicycles’ library package available at www.frickandtraa.com. It consists of all 4 bicycles and includes additional surfaces and extras ranging from one-off  bicycle passes captured in the city and bounces and rattles. The extra bicycles surfaces and additional effects are also available seperately here on ‘a Sound Effect’. If you’ve bought a single library and want to upgrade to the full package, contact us for a reduced price on the complete City Bicycles library. Every part of City Bicycles that you paid for will get you an extra reduction on the full package.

    Video Thumbnail

    Responses:

    344 AUDIO:City Bicycles has a plethora of content, for a great price. The perfect balance between a great concept, great presentation and outstanding execution, lands them an almost perfect score of 4.9..

    The Audio Spotlight: City Bicycles is worth getting if you are in need of great sounding and well edited bicycle sounds.

    Watch a video created by Zdravko Djordjevic.

    Video Thumbnail

     

    Add to cart
  • Mechanical Clicks Play Track 3774 sounds included, 118 mins total $35

    Clicks is busting at the seams with a wide variety of buttons, switches, dials, pumps, and more. Whether you’re in need of realistic buttons for a dramatic movie scene, or designing mechanical sounds for the next AAA video game, these clicks are bound to have you covered. Both near and distant perspectives were captured for (nearly) all recordings in this library, which adds flexibility when matching these sound effects to picture.

    Some of the objects in this library include but are not limited to:

    • AK-47 Rifle
    • Apple Laptop
    • Boombox
    • Computer Mice (3 types)
    • Electric Blender
    • Electric Iron
    • Flashlight
    • Food Chopper
    • Guitar Amplifier
    • Lamp
    • Power Strip
    • PS4 Game Controller
    • Pen
    • Vinyl Player
    • Underwood Portable Typewriter From 1926
    • Old Door Knob Parts (Sweetener)
    • Kitchen Oven (Sweetener)
    • Much Much More!
    Video Thumbnail
    Add to cart
  • Mechanical Clink Play Track 46+ sounds included $10

    Clink gets you the sound of of clicks, latches and whirrs generated from a little found Herschede Starville clock mechanism.

    Each take is loaded up with unique performances that explore the mechanism’s unique character from up-close.

    Recorded in a quiet space with an MKH50 through a John Hardy preamp, this libary is small but mighty. Also included is a NI Battery 4 kit that is programmed to enhance the best characteristics of the source material by doing transient enhancement, eq, delay and compression that can be dialed in to taste.

    Note: NI Battery 4 is required to use the kit – not included. You don't need any version of Battery to use the audio files as a standalone sample library.

    These recordings are excellent for adding character and complexity to your next mechanical element design.

    Add to cart
  • Mechanical Clocks Play Track 14+ sounds included $15 $10

    Clocks is a small unique sound library – not recorded from traditional clocks but of edited sounds that tick tock. These recordings come from items such as a tape measure, door locking, screwdriver, and much more.

    Recorded in 96kHz / 24 bit – All sounds are one minute long, loopable files.

    Disclaimer: Music in the audio demo is not included in the product.

    33 %
    OFF
    Add to cart
  • Mechanical Clocks Vol. 2 Play Track 33+ sounds included $15 $10

    Clock's Volume 2 is the sequel to the small but unique sound library – not recorded from traditional clocks but of edited sounds that tick tock.

    ‘Clocks Volume 2’ by Badlands Sound features 30+ tick tock sounds perfect for your projects in high-quality 96k / 24 bit. Sounds include metal and plastic clocks as well as metronomes and grandfather clocks.

    We believe these sounds will greatly benefit sound editors and sound designers allowing them to add these files to their projects quickly.

    All these sounds are one minute long loopable allowing you to save time editing.

    33 %
    OFF
    Add to cart
  • Horror Clockworks Play Track 230+ sounds included $54

    A new sound collection of ticking metal and wooden clocks, designed watch and old clock, large mechanism, retro rusty clock, and mechanical gears.

    Create up and downtempo metronomic ticking time pass and hypnotizing ticking cues, uneasy ticking tick-tock, design gradually building clockworks, dark pulsating ticking clock, metallic clicks that build tension.

    SampleTraxx Clockworks features 4 loop folders at 80-90-100-120 Bpm evolving from half note to the sixteenth note beat plus an extra folder of spare mechanicals sound effects and processed field recording.

    Video Thumbnail

    Features:

    Loops: 207 Wav – 48/24 – 80-90-100-120bpm – 2 bars

    Mechanism: 33 One-Shot Wav samples 48/24

    348 Mb of content

    100% Royalty-Free

    Add to cart
  • Foley Closets Play Track 106+ sounds included $49

    Meet CLOSETS_Small Doors, the first Household library from SoundFxWizard.

    Closets is a collection of 106 high quality 24-bit 96khz recordings of opening/closing and locking/unlocking households.

    It contains drawers, doors, washing machines, wardrobes and also small objects like chest, dvd box, cassette player.

    All sounds has been recorded and edited by talented sound designer Vincenzo Bellanova and thanks to their neutral mastering are perfect to fill sound effects needs in films and videos.

    Add to cart

Please share this

New Sound Effects

Your location

Recent Reviews

What others are saying: