Implosion sound effects library Asbjoern Andersen


When it comes to taking independent sound effects to new heights, Collected Transients' Stosh Tuszynski is definitely up there with the very best. To name a few, he's done libraries that innovatively capture the sounds of extreme heat and cold, spinning and rotating objects, and combustion - and now he's done a library dedicated to the sounds of massive implosions.

It captures the sounds of 10 huge buildings and structures imploding, from multiple perspectives, and here's his story behind the making of the impressive Implosions SFX library:


Written by Stosh Tuszynski
Please share:

Video Thumbnail

The launch trailer for Collected Transients’ Implosion SFX library

I was scrolling through my Google news feed one night when something piqued my interest. The roof of a stadium was to be imploded in Milwaukee, WI. I’d never seen an implosion and thought it might be a neat thing to see (and of course record!), so I made plans to drive up.

Before the drive, I did a bit of research via news articles and Google Maps. I scouted out a location I thought would work great for recording just outside the “exclusion zone” workers had mapped out.

I arrived about 30 minutes before the implosion was to happen and found a place to park. Before I got out of the car, I sat for a bit on my phone checking for any new stories about the implosion… making sure the implosion was still happening at the time I expected, and that nothing changed with the exclusion zone.

I came across one article that was just posted with a worker being asked about the implosion. I’ll have to paraphrase as I can’t find the article, but the worker essentially said “I just hope folks aren’t expecting some big show. You probably won’t be able to see much and and the explosion will just sound like a small firework.”

I was a little bummed reading that. I didn’t really care if I couldn’t see, but thinking that it would just be a tiny little “bang” rather than a big “BOOM” was a bit disappointing. Nevertheless, I was already there. No reason to turn around. I got out of the car and started walking to my planned recording location.

When I arrived, I was surprised to see a crowd of ~50 people standing exactly where I was planning to record. Without thinking about it too much, I set up my mics and camera and began testing things. The mics we’re sounding fine. The memory card had plenty of room. The camera angle was nice. The batteries were full. It was about 10 minutes before detonation when I hit record.

Until that point, I somehow had been oblivious to one of the toughest aspects of recording implosions: Crowds

I stood there among a now growing crowd of people monitoring my mics. For whatever reason, it took a couple minutes of me listening to the ambience and crowd chatter to put two and two together: When big things happen, people like to cheer… and people cheering probably wouldn’t be the best element to have so close to my mics when the implosion happened. Until that point, I somehow had been oblivious to one of the toughest aspects of recording implosions: Crowds

Crowds begin to gather at the University Hall implosion in Charlottesville, VA

I’ll blame not coming to this realization sooner on having to get up early. I’m definitely not a morning person! But not thinking about this in the earlier planning stages was simply a result of never having recorded an implosion before. I’m (obviously) not the only person who thinks seeing an implosion is cool. Lots of folks read the news, so lots of folks are going to show up.

I was greeted by a wonderful sight when I arrived. Not a single soul to be seen. On top of that, I now had a couple huge buildings between my microphones and the crowd I was in before, so cheering wouldn’t be an issue

With now just ~8 minutes before the implosion, I quickly went back to my familiar resource: Google Maps. I frantically panned around in satellite view, looking for alternate locations to record. I found a couple right away, but quickly surmised the views were too good, so lots of people would be there. I began looking for less likely locations and found one in a nearby alley. The view was just alright, but it would get me ~50 feet closer to the stadium, which never hurts when sound is the main goal. Now, with about 5 minutes to go, I hastily grabbed all my gear, and hobbled over to the alley.


The demo track for the Implosion SFX library

I was greeted by a wonderful sight when I arrived. Not a single soul to be seen. On top of that, I now had a couple huge buildings between my microphones and the crowd I was in before, so cheering wouldn’t be an issue. I quickly sat my gear down, set up my mics, bent down to hit record, and just as I was about to stand up… “BOOM”!

Implosion sound effects

Seconds after the Bradley Center stadium roof in Milwaukee, WI was imploded

A massive concussive blast froze me in place. This was no firework. Not even close! I heard glass shattering and metal falling. A huge cloud of dust and debris formed and began blowing my direction. I kneeled there in a little bit of shock. First for how loud the explosion was, and second for how close I came to missing the implosion. I’m not exaggerating about the timing. The raw recording has about five seconds of ambience before the implosion, and two of those are from pre-record.

A massive concussive blast froze me in place. This was no firework. Not even close! I heard glass shattering and metal falling. A huge cloud of dust and debris formed and began blowing my direction. I kneeled there in a little bit of shock

A huge feeling of joy came over me as I packed up before the dust got too bad. I think I smiled the entire walk back to my car. I got in and realized I should probably check playback as I didn’t even get a chance to look at my meters. I hit play and was happy to see the levels were great. Luckily I had recorded some pretty loud things with the same gear, so I was well prepared in that regard.

After that, I was hooked. The rapid sequence of events gave me quite a rush! It was one of those moments where I instantly realized I wanted to make a sound library. And over the course of about a year, that’s what I did!

Recording implosion sounds

Cooling Towers ready to be imploded in Somerset, MA

For each of the nine other building implosions I attended, I did quite a bit more preparation than I had for the first. I didn’t stop at finding one location to record, I found four or five possibilities for each distance I planned to record at. I showed up at least a day before each implosion and surveyed the potential locations for their positives and negatives.

More about Stosh Tuszynski’s approach to extreme sound effects recording:

We interviewed Stosh Tuszynski for the A Sound Effect podcast about the making of his Thermal Flux sound effects library – hear the interesting story behind that one below – the interview starts around the 4:40 mark.

Other SFX highlights from Collected Transients:

  • Fire Combustion Play Track 685 sounds included $100

    Combustion is a sound effects library exploding with combustible sound design material. It encompasses explosions, chemical reactions, fires, and various other forms of combustion. It provides a vast scope of sound design elements for weapons, whooshes, vehicles, impacts, and so much more.

    Add to cart
  • rOtation is a sound effects library built for sound design centered around things that spin. It contains nearly 200 exceptional sounds and is the first of its kind. If you’re looking for brand new sound design source material, rOtation is the ticket.

    Several months of research and recording has led to this very unique collection. It’s props range from ball bearings to trash cans; magnets to fireworks; water to nuts – all in the realm of rotation.

    It contains sounds of things that have never been included in a sound effects library before: The sound of a Euler’s Disk speeding up exponentially fast – the whir and chatter of Hurricane balls spinning to 5000+ RPM – Nuts and quarters zipping and buzzing by in a rumbling balloon – The power of neodymium magnets bending the tones of vibrating glass.

    Add to cart
  • Fire Thermal Flux Play Track 213 sounds included $60

    Thermal Flux is a sound effects library formed by extreme temperature reactions. With materials ranging from -119°F to 1900°F all captured at 192kHz/24bit, it’s a fiery (and icy) collection of unique sound design source material.

    In each recording, props with vast temperature differentials interact with each other… Red hot ball bearings vaporize liquids, melt ice, and destroy various household products. Extremely cold metal instantly freezes water. Molten metals and glass pour into water, groaning, chirping, and crackling, as they solidify. Dry ice causes coins to viciously chatter. Water beads bounce, whine, and buzz on blazing hot pans. White hot sand roars and erupts upon contact with water. All of this and more was recorded with mics capturing quality frequency information up to ~65kHz. This ultrasonic content allows for extreme pitch shifting without compromising fidelity.

    Add to cart

Even with all that, it never failed that on the day of each implosion I was thrown massive curve balls. Unannounced streets would be closed so I couldn’t park near by. Locations would be closed off, or I would get kicked out at the last minute and have to scramble. Random crowds would show up to my prime spots.

Implosion sound effects recording

What was left of the Pasadena State Bank building after it was imploded in Pasadena, TX

However, with each implosion… with each curve ball… I got more bold. I hid my mics in bushes, cars, alleys, and rooftops. I left thousands of dollars of gear sitting in public locations with no visibility for hours at a time. Multiple times, I talked security/police into letting me leave my gear inside the exclusion zone. One time close enough that the shock wave destroyed a microphone! I waded across a tiny river at 3am in 40°F temps to hide mics in a tall grass field. All of this, just to avoid crowds and get the best recordings possible.

It also never failed, that when each implosion was finished, I was overcome with that same feeling of joy I had after almost completely screwing up the first one 😉

A big thanks to Stosh Tuszynski for the story behind his new Implosion SFX library! Be sure to check out the full release below:

Implosion
 
  • Implosion is a sound effects collection of buildings being destroyed with explosives. It features 10 unique building implosions recorded across the country.

    Each implosion was recorded with 4 to 14 channels of audio. To offer multiple perspectives, mics were placed as close as 150ft (~50m) and as far away as 2000ft (~600m) from the various explosive demolitions.

    Add to cart
Here's Collected Transients' own description of the library: Implosion is a sound effects collection of buildings being destroyed with explosives. It features 10 unique building implosions recorded across the country.

Each implosion was recorded with 4 to 14 channels of audio. To offer multiple perspectives, mics were placed as close as 150ft (~50m) and as far away as 2000ft (~600m) from the various explosive demolitions.

   

Please share this:


 


 
 
THE WORLD’S EASIEST WAY TO GET INDEPENDENT SOUND EFFECTS:
 
A Sound Effect gives you easy access to an absolutely huge sound effects catalog from a myriad of independent sound creators, all covered by one license agreement - a few highlights:
 
 
  • Destruction & Impact Metamorphosis Play Track 2328 sounds included $190

    Metamorphosis is a huge collection of recorded source, synthesized material and hybrid sounds. The library was created to cover a wide range of themes, with rich textures, aggressive impacts and a large selection of pass bys, bass drops, pyrotechnics and many more types of material.

    All of the Recorded Section was captured at 384KHz with microphones capable of recording up to 200KHz among with more conventional mics. The resulting assets are sounds that can be stretched to new extremes for greater sound design opportunities.
    In many cases I took the liberty to slow down the assets while editing the sounds to deliver what I thought was the most useful version of a given recording though in most cases I have also included other takes at the original 384KHz sample rate to get the best of both worlds.

    All of the Synthesized Content was created in Serum while the Hybrid Section was created by manipulating the Recorded and Synthesized sounds.

    Techniques such as morphing were used to blur the lines in between the nature of the two sources, making for ambiguous yet extremely versatile material that can be employed on both realistic and abstract designs.

    Bonus: Two extra libraries included for free:
    This library also includes two additional releases from Mattia Cellotto - for free: Crunch Mode delivers 230 crunchy sounds made with a variety of vegetables, fresh bread, pizza crust and a selection of frozen goods. The Borax Experiment gets you 158 squishy, gory, slimy and gooey sounds.
    Add to cart
  • A great add-on library for anyone looking to expand their weather sounds. A collection of recordings made during travels in Iceland, Sweden, England and France. A couple surround versions as well as stereo versions of rich and moody winds across plains and through leaves, plenty of interior winds through window gaps and chimneys, and water in several forms; rain, bubbles, geysers and more.

    50 %
    OFF
    Ends 1586037600
    Add to cart
  • Footstep & Foley Sounds contains 511 high quality professionally recorded footstep sounds. Surfaces included: concrete, dirt, grass, gravel, metal, mud, water, wood, ice and snow. Plus 141 Foley sounds covering a variety of character movement sounds. A perfect addition to add realism to your footstep sounds.

    This pack also includes a variety of 160 bonus sounds effects from our full library Pro Sound Collection. ALL sounds from Footstep & Foley Sounds are included in Pro Sound Collection so if you need more sounds be sure to check it out before purchase.

    Add to cart
 
Explore the full, unique collection here

Latest sound effects libraries:
 
  • Animals & Creatures Wolves Play Track 500+ sounds included, 78 mins total $55

    DESCRIPTION:

    This library provides the highest quality vocal sounds of the members of a wolves pack in their social interaction: Howls solo and in groups from 2 to 9, fierce growls, extremely bassy grumblings, barks, snorts, whines, yapping. All the raw material was collected using the method of passive week-long observation with minimal intrusion, nothing was staged or provoked. A large part of the library is made of unintentional recordings of the accidental territorial quarrel between a polar wolf SEVER and an alpha male HORT: very aggressive growls, teeth clacking and other fight sounds. Luckily, despite the terrifying sonic impression, no one was injured. About 60 hours of raw recordings were edited into 1 hour 18 minutes, 151 files with 500+ individual sounds. Wolves are very emotional, expressive and surprisingly musical. So, these sounds can be equally useful for films and games representing wolves, as well as for creature and monster sound design. Some of the recordings sound very humanlike.

    10% of this library revenue goes to the shelter for wolves.

  • Mechanical Just Whoosh 4 | Whoosh Sweeteners Play Track 532 - 1614 sounds included From: $55 From: $30.80

    JUST WHOOSH 4 sends forth an armada of highly trained and bloodthirsty Whoosh Sweeteners, ready to take over and beef up any feeble Whooshes, spineless Pass-Bys and wimpy Transition sound effects in no time.
    So they finally do what they should: intensifying the sense of motion and velocity of anything that moves on screen.
    From short, fast pass-bys, through magical fireballs to massive, droning, portly passing spaceships – This Whoosh Sweetener Toolkit does the job.

    To strike with even more precision and efficiency, the fleet splits up into three squadrons:

    JUST WHOOSH 4
    1st STRIKE

    Categories:
    Noise & Interference
    Rattle & Mechanics
    Spacecrafts & SciFi
    537  Sounds | 1,84 GB
    JUST WHOOSH 4
    2nd STRIKE

    Categories:
    Abstract & Fantasy
    Engines & Motors
    Projectiles & Ballistics
    545 Sounds | 1,82 GB
     
    JUST WHOOSH 4
    3rd STRIKE

    Categories:
    Friction & Organic
    Metallic & Dystopian
    Synthetic & Artificial
    Water & Bubbles
    532 Sounds | 1,58 GB

     

    44 %
    OFF
    Ends 1587419999
  • A sound library of the digital electronic world of 1s and 0s created from digital sources.

    Sounds include glitch, static, snaps, pops, interference, signal malfunction, dropouts, data transmissions, unreferenced issues, bad clocking or incorrect timing effect and pitch/time manipulation.

    Captured as found or created from any digital format device including computers, software, hardware interfaces, optical and coaxial streams, file-based, mobile devices, streaming media, digital synthesizers, and samplers.

    All sourced from the output jacks and speakers from the digital devices as well as broadcast facilities, transmission sites, data paths, wifi, and cellular data.

    The files have been normally left raw with its range of frequencies and dynamics, but have been normalized so be careful and check your volume level!

    Great for those moments needing an emanation from a digital electronic device, glitchy transitions, data transmissions and clock timing for tech, sci-fi, horror, and dystopia or creating electronic beats and ambient drone material.

  • From 24/96 Sound Effects. Immersive Room tones features 28 HD 24bit/96khz Surround Sound Effects with a large selection of Interior Room tones and Quiet Places. Empty rooms, Hallways, Automobiles and more. Recorded with a Voyage Audio 2nd Order Spatial Microphone. Mastered with ProTools Ultimate in 3 configurations: Ambisonic (Ambix 2nd Order (Wyzxrstuv), Atmos™ 7.1.2 Surround Sound (LRCLfeLssRssLrsRrsLtsRts) and Stereo (L-R) Most tracks are 2 Minutes in length with embedded metadata. All new, original recordings. Want a taste of what’s included? Download the O2A and 7.1.2 Surround Demo files HERE and try it out on your own system!

    24 %
    OFF
    Ends 1588283999
  • Punchy Transients is an organized toolbox that serves as a reliable source of ”layers of impact” which many, many sounds do require to be in their best fit. It is also a trusty stash for designers who need to save some time to focus on something else.

    The library content was made by recording a collection of hits on a punching bag using many techniques. Also, a dry version of each sample and a folder of bonus thumps are included.

    33 %
    OFF
    Ends 1586296799
 
FOLLOW OR SUBSCRIBE FOR THE LATEST IN FANTASTIC SOUND:
 
                              
 
GET THE MUCH-LOVED A SOUND EFFECT NEWSLETTER:
 
The A Sound Effect newsletter gets you a wealth of exclusive stories and insights
+ free sounds with every issue:
 
Subscribe here for free SFX with every issue

Leave a Reply

Your email address will not be published. Required fields are marked *

HTML tags are not allowed.