Implosion sound effects library Asbjoern Andersen


When it comes to taking independent sound effects to new heights, Collected Transients' Stosh Tuszynski is definitely up there with the very best. To name a few, he's done libraries that innovatively capture the sounds of extreme heat and cold, spinning and rotating objects, and combustion - and now he's done a library dedicated to the sounds of massive implosions.

It captures the sounds of 10 huge buildings and structures imploding, from multiple perspectives, and here's his story behind the making of the impressive Implosions SFX library:


Written by Stosh Tuszynski
Please share:



Wild Implosion Sound Effects Library - 10 Buildings & Structures Blasted To Bits


The launch trailer for Collected Transients’ Implosion SFX library

I was scrolling through my Google news feed one night when something piqued my interest. The roof of a stadium was to be imploded in Milwaukee, WI. I’d never seen an implosion and thought it might be a neat thing to see (and of course record!), so I made plans to drive up.

Before the drive, I did a bit of research via news articles and Google Maps. I scouted out a location I thought would work great for recording just outside the “exclusion zone” workers had mapped out.

I arrived about 30 minutes before the implosion was to happen and found a place to park. Before I got out of the car, I sat for a bit on my phone checking for any new stories about the implosion… making sure the implosion was still happening at the time I expected, and that nothing changed with the exclusion zone.

I came across one article that was just posted with a worker being asked about the implosion. I’ll have to paraphrase as I can’t find the article, but the worker essentially said “I just hope folks aren’t expecting some big show. You probably won’t be able to see much and and the explosion will just sound like a small firework.”

I was a little bummed reading that. I didn’t really care if I couldn’t see, but thinking that it would just be a tiny little “bang” rather than a big “BOOM” was a bit disappointing. Nevertheless, I was already there. No reason to turn around. I got out of the car and started walking to my planned recording location.

When I arrived, I was surprised to see a crowd of ~50 people standing exactly where I was planning to record. Without thinking about it too much, I set up my mics and camera and began testing things. The mics we’re sounding fine. The memory card had plenty of room. The camera angle was nice. The batteries were full. It was about 10 minutes before detonation when I hit record.

Until that point, I somehow had been oblivious to one of the toughest aspects of recording implosions: Crowds

I stood there among a now growing crowd of people monitoring my mics. For whatever reason, it took a couple minutes of me listening to the ambience and crowd chatter to put two and two together: When big things happen, people like to cheer… and people cheering probably wouldn’t be the best element to have so close to my mics when the implosion happened. Until that point, I somehow had been oblivious to one of the toughest aspects of recording implosions: Crowds

Crowds begin to gather at the University Hall implosion in Charlottesville, VA

I’ll blame not coming to this realization sooner on having to get up early. I’m definitely not a morning person! But not thinking about this in the earlier planning stages was simply a result of never having recorded an implosion before. I’m (obviously) not the only person who thinks seeing an implosion is cool. Lots of folks read the news, so lots of folks are going to show up.

I was greeted by a wonderful sight when I arrived. Not a single soul to be seen. On top of that, I now had a couple huge buildings between my microphones and the crowd I was in before, so cheering wouldn’t be an issue

With now just ~8 minutes before the implosion, I quickly went back to my familiar resource: Google Maps. I frantically panned around in satellite view, looking for alternate locations to record. I found a couple right away, but quickly surmised the views were too good, so lots of people would be there. I began looking for less likely locations and found one in a nearby alley. The view was just alright, but it would get me ~50 feet closer to the stadium, which never hurts when sound is the main goal. Now, with about 5 minutes to go, I hastily grabbed all my gear, and hobbled over to the alley.


The demo track for the Implosion SFX library

I was greeted by a wonderful sight when I arrived. Not a single soul to be seen. On top of that, I now had a couple huge buildings between my microphones and the crowd I was in before, so cheering wouldn’t be an issue. I quickly sat my gear down, set up my mics, bent down to hit record, and just as I was about to stand up… “BOOM”!

Implosion sound effects

Seconds after the Bradley Center stadium roof in Milwaukee, WI was imploded

A massive concussive blast froze me in place. This was no firework. Not even close! I heard glass shattering and metal falling. A huge cloud of dust and debris formed and began blowing my direction. I kneeled there in a little bit of shock. First for how loud the explosion was, and second for how close I came to missing the implosion. I’m not exaggerating about the timing. The raw recording has about five seconds of ambience before the implosion, and two of those are from pre-record.

A massive concussive blast froze me in place. This was no firework. Not even close! I heard glass shattering and metal falling. A huge cloud of dust and debris formed and began blowing my direction. I kneeled there in a little bit of shock

A huge feeling of joy came over me as I packed up before the dust got too bad. I think I smiled the entire walk back to my car. I got in and realized I should probably check playback as I didn’t even get a chance to look at my meters. I hit play and was happy to see the levels were great. Luckily I had recorded some pretty loud things with the same gear, so I was well prepared in that regard.

After that, I was hooked. The rapid sequence of events gave me quite a rush! It was one of those moments where I instantly realized I wanted to make a sound library. And over the course of about a year, that’s what I did!

Recording implosion sounds

Cooling Towers ready to be imploded in Somerset, MA

For each of the nine other building implosions I attended, I did quite a bit more preparation than I had for the first. I didn’t stop at finding one location to record, I found four or five possibilities for each distance I planned to record at. I showed up at least a day before each implosion and surveyed the potential locations for their positives and negatives.

More about Stosh Tuszynski’s approach to extreme sound effects recording:

We interviewed Stosh Tuszynski for the A Sound Effect podcast about the making of his Thermal Flux sound effects library – hear the interesting story behind that one below – the interview starts around the 4:40 mark.

Other SFX highlights from Collected Transients:

  • Combustion is a sound effects library exploding with combustible sound design material. It encompasses explosions, chemical reactions, fires, and various other forms of combustion. It provides a vast scope of sound design elements for weapons, whooshes, vehicles, impacts, and so much more.

  • rOtation is a sound effects library built for sound design centered around things that spin. It contains nearly 200 exceptional sounds and is the first of its kind. If you’re looking for brand new sound design source material, rOtation is the ticket.

    Several months of research and recording has led to this very unique collection. It’s props range from ball bearings to trash cans; magnets to fireworks; water to nuts – all in the realm of rotation.

    It contains sounds of things that have never been included in a sound effects library before: The sound of a Euler’s Disk speeding up exponentially fast – the whir and chatter of Hurricane balls spinning to 5000+ RPM – Nuts and quarters zipping and buzzing by in a rumbling balloon – The power of neodymium magnets bending the tones of vibrating glass.

  • Thermal Flux is a sound effects library formed by extreme temperature reactions. With materials ranging from -119°F to 1900°F all captured at 192kHz/24bit, it’s a fiery (and icy) collection of unique sound design source material.

    In each recording, props with vast temperature differentials interact with each other… Red hot ball bearings vaporize liquids, melt ice, and destroy various household products. Extremely cold metal instantly freezes water. Molten metals and glass pour into water, groaning, chirping, and crackling, as they solidify. Dry ice causes coins to viciously chatter. Water beads bounce, whine, and buzz on blazing hot pans. White hot sand roars and erupts upon contact with water. All of this and more was recorded with mics capturing quality frequency information up to ~65kHz. This ultrasonic content allows for extreme pitch shifting without compromising fidelity.

Even with all that, it never failed that on the day of each implosion I was thrown massive curve balls. Unannounced streets would be closed so I couldn’t park near by. Locations would be closed off, or I would get kicked out at the last minute and have to scramble. Random crowds would show up to my prime spots.

Implosion sound effects recording

What was left of the Pasadena State Bank building after it was imploded in Pasadena, TX

However, with each implosion… with each curve ball… I got more bold. I hid my mics in bushes, cars, alleys, and rooftops. I left thousands of dollars of gear sitting in public locations with no visibility for hours at a time. Multiple times, I talked security/police into letting me leave my gear inside the exclusion zone. One time close enough that the shock wave destroyed a microphone! I waded across a tiny river at 3am in 40°F temps to hide mics in a tall grass field. All of this, just to avoid crowds and get the best recordings possible.

It also never failed, that when each implosion was finished, I was overcome with that same feeling of joy I had after almost completely screwing up the first one 😉

A big thanks to Stosh Tuszynski for the story behind his new Implosion SFX library! Be sure to check out the full release below:

Implosion
 
  • Implosion is a sound effects collection of buildings being destroyed with explosives. It features 10 unique building implosions recorded across the country.

    Each implosion was recorded with 4 to 14 channels of audio. To offer multiple perspectives, mics were placed as close as 150ft (~50m) and as far away as 2000ft (~600m) from the various explosive demolitions.

Here's Collected Transients' own description of the library: Implosion is a sound effects collection of buildings being destroyed with explosives. It features 10 unique building implosions recorded across the country.

Each implosion was recorded with 4 to 14 channels of audio. To offer multiple perspectives, mics were placed as close as 150ft (~50m) and as far away as 2000ft (~600m) from the various explosive demolitions.

   

Please share this:


 



 
 
THE WORLD’S EASIEST WAY TO GET INDEPENDENT SOUND EFFECTS:
 
A Sound Effect gives you easy access to an absolutely huge sound effects catalog from a myriad of independent sound creators, all covered by one license agreement - a few highlights:

  • Door Sound Effects Noisy Doors Play Track 44 sounds included $10

    This library contains recordings of eleven different types of doors specifically chosen for their interesting sound. I performed all actions with a lot of detail covering “open/close”, “knocks”, “bangs and thuds”, “handle grab and rattle” and when possible also “crackles and squeaks” (all recorded at various intensities)

    50 %
    OFF
    Ends 1711666799
  • Metal Sound Effects MetalMotion Play Track 2000+ sounds included, 239 mins total $110

    MetalMotion is a sound design construction kit that contains four hours of moving metal mayhem: clicks and clanks, rolls and drags, wronks and squeals, scrapes and rattles, ranging from from tiny to monstrous. Nathan Moody’s unique performances with unusual combinations of props produce everything from Foley-like movements to intense groans and howls.

    Whether you’re covering a robot’s movements, sweetening weapon Foley, making crafting or pick-up sounds in a game, placing unusual layers beneath a kaiju’s roar, or crushing a submarine with undersea pressure, this collection covers the full range of subtle to raucous. Each file has many performance variations for creative choice and game audio asset creation.

    While there are some tasty impacts within, this library’s true focus is on characterful movements: handling, rummaging, opens, closes, ratchets, swirls, rolls, drags, drops, spins, rubs, zuzzes, and bows. Metal containers, filing cabinets, modern appliances, vintage (and very rusty) tools, cymbals, bells, grills, plates, bars, rods, and tubes, and many other props lent their voices to this collection.

    This UCS-compliant library was recorded with a combination of standard, contact, and ultrasonic-capable microphones through Millennia preamps. Sample rates vary based on the amount of ultrasonic content in each file. The audio files are mastered for realism, ready for extreme processing and pitch shifting of your own, but still useful in more grounded contexts.

  • Electricity Sound Effects Polarity Play Track 975 sounds included $72

    Polarity delivers more than 950 sounds of electricity, science and technology – captured in several locations around the world, from electricity museums to science labs. About 50% of the library is all about electricity, with various types of Jacob’s Ladders, Tesla Coils, Ruhmkorff lamp and all sorts of impactful bursts of energy.

    Then we go through welders, plasma spheres, 3D printers, starting to cover a more broad technology theme – like old phones, telegraphs, dynamo wheels, rotary dials, whirling watchers, alarm, lab centrifuges, something scientists call a roller and a rocker, servo sounds, neon lights, a wimshurst machine and sparklers.

    Many sounds in this section were captured from vintage equipment, from a 1928’s tram to old telephone switchboards, high voltage levers and control surfaces.

    All content was recorded at 192KHz with a Sanken CO100K, a couple of Sennheiser 8040 and a Neumann 81i, translating into final assets that have plenty of ultrasonic content, ready for the most extreme manipulation.

    Bonus: Two extra libraries included for free:
    This library also includes two additional releases from Mattia Cellotto - for free: Crunch Mode delivers 230 crunchy sounds made with a variety of vegetables, fresh bread, pizza crust and a selection of frozen goods. The Borax Experiment gets you 158 squishy, gory, slimy and gooey sounds.
    20 %
    OFF
Explore the full, unique collection here

Latest sound effects libraries:
 
  • Trench Rammers is a one-of-a-kind sound library, created by sound designer Barney Oram. It features recordings of two 20th century Trench Rammers, some of the last operating machines of their kind in the world. The library features 48 files in total, capturing the Trench Rammers using a variety of microphones and perspectives, supplied in 192kHz 24bit WAV file format.

    This library contains multiple recordings of two antique Trench Rammers, the Pegson ER5 and the Warsop Benjo, and also features additional recordings of four antique stationary engines, the Amanco Hired Man (1920s), the JAP 1947, the Lister D (1940s) and the Norman T3000.

    Recorded in Leeds, UK, this library features multi-mic coverage and a range of distance positions captured on all included source content. Microphones used include; Sanken, Sennheiser, Neumann and DPA, captured with Sound Devices and Tascam recorders.

    This library includes detailed SoundMiner metadata and utilizes the UCS system for ease of integration into your library.

    Behind the Scenes Video:


    Trench Rammer


  • The cozy natural rhythms of hums, scrapes, splashes and thuds soundtrack the pottery workshop where the earth meets art. Find the true sound of it with Vadi Sound Library.

     

    About Pottery Workshop

     

    84 sounds that are clean, subtle and capture pretty much every object and action of the magic of fire and earth.

    From the rhythmic hum of the spinning potter’s wheel, to the splash of water, the scrape of clay with the tools shaping and smoothing surfaces, listen up for the symphony of creation.

    You will hear the tapping and thud of ceramic pottery, wooden ribs, wire cutters, loop tools, and sponges, all kinds of rummage, and mud actions on the potter’s wheel. The clicking and whirring of mechanisms during firing cycles add a mechanical counterpoint to the workshop’s natural rhythms.

    You will get variations of sounds in different proximity, size, and style of action. This collection is handy due to the clarity and diversity of the raw sounds. They have both Foley and practical usability and room for further sound design.

    You will get intuitive, detailed naming, UCS compatibility and the usual Vadi Sound craft and attention to detail in 84 pristine sounds. Recorded in 24bit-96kHz.WAV format on our favorite Sennheiser MKH 8040 stereo pair and Zoom F6.

     

    Keywords

    Pottery, workshop, electric potter’s wheel, wheel, oven, heat gun, mud, clay, ceramic, glass, wooden, metal, cup, handle, push, pull, move, remove, shape, tap, shake, clank, level, lid, tool, organizer, toolbox, rummage, fiberboard, button, bucket, sponge, plate, Dremel.

     

    What else you may need

    You may also want to check out Drag & Slide for 477 sound files of dragging, sliding, scraping and friction sounds of different objects made of wood, plastic, metal on various surfaces. Our bestseller Crafting & Survival is another good choice to get access to 1000+ survival, gathering, movement and crafting sounds.

  • All files are recorded 32bit, 192 kHz, with Shure KSM 137, Line Audio Omni1, FEL Clippy XLR EM272, Sonorous Objects SO.3 and JrF C-Series Pro+ microphones, Sound Devices MixPre-6 II & Zoom F3 recorders. Library contains wav files of driving, interior and exterior foley, mechanical and electrical sounds. It is also available in UCS.

  • Introducing Devils Bane Trailer, a chilling symphony of horror encapsulated in 533 meticulously crafted sound files, ready to unleash terror upon your audience. Dive into a nightmare realm where every creak, whisper, and shriek is meticulously designed to send shivers down your spine.

    • 533 files
    • 3.5 GB of game audio assets
    • All in 96k 24bit .wav
    • Dark Horror Movie Trailer Sound Effects Library
    17 %
    OFF
  • Birdsong from the countryside of the Swedish rural region of Värmland.


   

Leave a Reply

Your email address will not be published. Required fields are marked *

HTML tags are not allowed.